Big Bottled Water Filling Machine Description:
Big bottled water filling machine combines the function of washing, filling, capping system in one machine, based on the introduction, digestion and absorption of foreign advanced technology, according to pure water, mineral water and other drinks process requirements in China, self-developed and designed plastic bottle filling machine with a leading domestic level.
The big bottled water filling machine can finish all the process such as washing bottle, filling and capping, it can reduce the materials with outside touch time, improve the sanitary conditions, production capacity and economic efficiency. It is a good option for water filling machine factory. Well Machinery is a Manufacturer and Supplier in China,and specialized in providing you with big bottled water filling machine,water filling machine,filling equipment and so on.

Big Bottled Water Filling Machine(10L) Working process:
The empty bottle is transmitted to rinsing part from bottle inlet screw by conveying chain and then separated one by one by track-wheel, the distance is same.The gripper installed on the rotary disk catches bottle and turns it over 180 degrees and makes the bottleneck face ground. In the special rinsing area, the nozzle on the gripper sprays water to rinse bottle inner wall. After rinsing and draining, the bottle turns over 180 degrees along the guide rail and make the bottleneck faces sky. Then rinsed bottle is transferred to the filling part through poking bottle star-wheel. The bottle that enters into the filling equipment is hold by neck holding plate. The filling valve acted by the cam can realize up and down. It adopts pressure filling way. The filling valve opens and begins filling when it moves down and touches
the bottleneck, the filling valve move up and leave the bottleneck when it finishes filling, the full bottle is transferred to the capping part through hold neck transition poking wheel. The stop screwing knife holds the bottleneck, keeps bottle upright not rotating. The screw capping head keeps in revolution and autorotation. It can finish a whole capping course including catching, pressing, screwing, discharging through the action of the cam. The full bottle is transferred to bottle outlet conveyor to the next process through poking wheel. The whole process adopts hanging neck type.

Washing:

Filling:

Capping:

Advantages of Big Bottled Water Filling Machine:
1. Big bottled water filling equipment applies bottle handling technical and the filling valves go up-down when filling, which make sure the bottle filling goes stable, reliable during high speed. The bottle handling technical also make the different bottle changing easily without changing too many accessories.
2. The clamps don’t contact with the bottle mouths. This avoids second pollution to the bottles.
3. The capping heads can be washed by detergent, which realizes sanitation of the capping module all the time.
4. Capping module adopts photoelectricity tracking system, which realizes “NO BOTTLE NO CAPPING”
5. Grippers can be used as transmission instead of the star wheel in the machine according to customer’s requirement. This reduces change parts for different capacity bottles.