Automatic filling machine is one of the equipment of many food, beverage, medicine, and daily chemical enterprises. It also plays an increasing role in our lives. Therefore, many enterprises need to purchase fully automatic filling equipment to help achieve production. So after we buy the irrigation machine, the use of the irrigation machine may be a lot of people are half-understanding, before and after the use of what work, which requirements we must pay attention to?

First, before the fully automatic filling machine is used, install it first and then debug it. Before debugging, read the instructions carefully and prepare the tools used. After the filling equipment is installed, the filling track and bottle tray are adjusted horizontally, the storage tank is full of materials, and all electrical switches are closed. Insert the container to be filled into the kit box and turn on the external power supply. The power socket must be a three-pin socket and have a reliable grounding line to prevent the electric shock person from leaking from the shell. Put the machine power switch to ON and the power supply light. Use the filling frame support plate to hold the filling frame, and use the finger to top the positioning sleeve on the filling head. The positioning sleeve should be able to move flexibly up and down, in which the filling pin is exposed or retracted without hindrance. The switch under the tank is pushed to the position where the material can flow into the total metering pump. According to the total amount of each container filling, the screw on the crank is adjusted, and the knob of the filling speed regulating plate is turned to about 20 degrees. Then the switch on the filling speed plate is pushed to the position of opening. When the liquid flow out of each filling head is set as a quantity, the liquid volume is fine-tuned and the screw nut is tightened, and the shell of the filling head is covered and the supporting plate of the filling frame is released.

After the filling equipment is used, it is also necessary to pay attention to its maintenance. When the piston is removed during maintenance, the fixed screw must be removed at the same time so as not to affect the process requirements of the other when it is removed. Before the piston filling machine is cleaned, the remaining products should be cleared and then filled with soft cleaning liquid in the drum. Cylinders have been lubricated at the factory, please do not open or add any lubricating oil to ensure that the filling machine surface is clean and hygienic, and power off when not working. In addition, the maintenance and correct use of the full automatic filling machine, but also regular testing and debugging. Only in this way can the filling machine work healthily and steadily.

Today, with the increase in people’s demand for various beverages and daily products, it also plays a role in promoting the development of filling machines, which are widely used in the production process of enterprises. The details that should be paid attention to during the use of the filling machine are related to the quality of the enterprise’s products and the production efficiency of the enterprise. Therefore, it is necessary to do a good job in the installation, commissioning, use, and maintenance of the filling machine.